Hyundai Elantra: ABS Control Unit. Repair procedures - ABS(Anti-Lock Brake System) - Brake System - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: ABS Control Unit. Repair procedures

Removal

1.
Disconnect the battery(-) terminal.
2.
Disconnect the brake tubes from the HECU.

Tightening torque :
Nut (A) : 12.7 ~ 16.7N.m(1.3 ~ 1.7kgf.m, 9.4 ~ 12.3lb-ft)
Nut (B) :
ABS : 12.7 ~ 16.7N.m(1.3 ~ 1.7kgf.m, 9.4 ~ 12.3lb-ft)
ESC : 18.6 ~ 22.6N.m(1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)

3.
Disconnect the HECU connector.
4.
Remove the HECU by loosening the bracket mounting bolts.

Tightening torque Nm (kgf.m, lb-ft):
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3 ~ 18.8lb-ft)

Х
Never attempt to disassemble the HECU.
Х
The HECU must be protected during storage and transport, and must not be subjected to excessive shock.

Installation

1.
Installation is the reverse of removal.
2.
After installation, bleed the (Refer to ABS bleeding)