Hyundai Elantra: Fuel Pump. Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: Fuel Pump. Repair procedures

Removal (Including Fuel Filter And Fuel Pressure Regulator)

Remove the rear seat cushion (Refer to "SEAT" in BD group).
Open the service cover (A).

Disconnect the fuel pump connector (A).

Start the engine and wait until fuel in fuel line is exhausted.
After engine stalls, turn the ignition switch to OFF position.
Disconnect the fuel feed tube quick-connector (A), the vacuum tube quick-connector (B) and canister close valve connector (C).

Remove the rubber cover (D).
Unscrew the fuel pump plate cover (A) with the special service tool (SST No.: 09310-2B200) and remove the fuel pump assembly.


Installation is reverse of removal.

Fuel Pump Plate Cover Tightening:
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.4lb-ft)