Hyundai Elantra: Removal - Passenger Airbag (PAB) Module. Repair procedures - Airbag Module - Restraint - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Removal

Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
Disconnect the passenger airbag connector (B) and remove the PAB mounting bolts (A).

Remove the crash pad.
(Refer to the Body group - "Crash pad")
Replace the crash pad which that has been damaged after the PAB has been deployed.
Remove the heater duct from the crash pad.
Remove the mounting bolts from the crash pad. And then remove the passenger airbag.
The removed airbag module should be stored in a clean, dry place with the airbag cushion up.