Hyundai Elantra: Repair procedures - General Information - Restraint - Hyundai Elantra HD 2006Ц2010 Service ManualHyundai Elantra: Repair procedures

Component Replacement After Deployment

Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.
When the front airbag(s) deployed after a collision, replace the following items.
-
SRSCM
-
Deployed airbag(s)
-
Deployed seat belt pretensioner(s)
-
Front impact sensors
-
SRS wiring harnesses
-
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
When the seat belt pretensioner(s) deployed after a collision, replace the following items.
-
Deployed seat belt pretensioner(s)
-
SRSCM
-
Front impact sensors
-
SRS wiring harnesses
When the side/curtain airbag(s) deployed after a collision, replace the following items.
-
SRSCM
-
Deployed airbag(s)
-
Side impact sensor(s) for the deployed side(s)
-
SRS wiring harnesses
After the vehicle is completely repaired, confirm the SRS airbag system is OK.
-
Turn the ignition switch ON, the SRS indicator should come on for about 6 seconds and then go off.