Hyundai Elantra: Replacement - Rear Shock Absorber. Repair procedures - Rear Suspension System - Suspension System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra: Replacement

1.
Remove the rear wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2.
Remove the rear shock absorber (A) from the frame by loosening the bolt.

Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.
Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle.

Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

4.
Installation is the reverse of removal.